Next thing to remove is the barrel. Two Allen screws on top of the reciever..
https://s6.postimg.org/a0vtaxe0x/165.jpg

And the barrel comes loose.
https://s6.postimg.org/asyha4i81/166.jpg

Krale altered thetransfer port in the barrel. Seems like it`s a bit crude but it isn`t it works erfectly.
https://s6.postimg.org/5g9mvzubl/168.jpg

Getting the brass probe out took some time. Getting the end cap out took some time, i needed to be a bit creative. I did and got a small hammer and a longer screwdriver and tapped the end cap out.
https://s6.postimg.org/yp1m1wpq9/148_-_kopie.jpg

https://s6.postimg.org/3tkfari9t/174.jpg

Next thing was to remove the bolt.
https://s6.postimg.org/w55z7t269/170.jpg

And the probe came clean out.
https://s6.postimg.org/3m1drzwox/176.jpg

The two pins that hold the trigger in its place is easily to be romoved. Mind the springs!
https://s6.postimg.org/9wxegxj5t/159.jpg

And you`ll get this.
https://s6.postimg.org/uild0bfi9/172.jpg

And in the end you`ll get this.
https://s6.postimg.org/l0lm09ttt/179.jpg



Best regards!

Roel

Hiya,

Here are a few groups i shot today. It still isn`t the best grouping i`ve ever had.
https://s6.postimg.org/gjgdz49c1/187.jpg

https://s6.postimg.org/5xwin430h/193.jpg

https://s6.postimg.org/qxcmem4ox/194.jpg

https://s6.postimg.org/uom70xidd/196.jpg

https://s6.postimg.org/fjq33eu69/197.jpg

Best!

Roel

Its getting there Roel. What do you think will be your next thing to tackle?

Hi,

i bought a Hatsan barrel and i`m gonna use it in the Kral. In my 'Koejak' project i`m using a Hatsan barrel too and that barrel groups great, 1 1/4 inch at 100 metres, so i`ve got some confidence Hatsan barrels. The Hatsan barrel needs some work so it will take some time...... But i`ll keep you guys posted.

Best, Roel

I think most don't take it off is probably warranty reasons. Or not enough know how or rather they are not mechanically inclined enough to do themselves.

Hopefully the groups shrink some Moets

Jay

Hi,

thanks Jay. I hope so too. I went to the dirty, dark moist and sinister shooting range yesterday evening. It wasn`t moist yesterday. It was fokkin` wet! Look at this!
https://s6.postimg.org/8tljtpfep/829.jpg

It`s been raining cats and dogs over here and it makes clear that the roof isn`t watertight. But we knew that.

I took along the HW97K to do some training for the next 100 meter springermatch and offcourse i took the Kral with me. Since i was on a 100 meter trackt i might as well try the Kral on the 100 meter track.

Waddayasay? Not half as bad as expected. I was mailing with Krale today. Richard told me there`s Kral barrels on the way to the Netherlands. When those barrels arrive we`ll see if there is a nice tight barrel for my Kral.
https://s6.postimg.org/dtnlfeaf5/835.jpg

[url=https://postimg.org/image/xa8b1x5j1/]https://s6.postimg.org/ug55oh3cx/837.jpg

https://s6.postimg.org/xbnasgdoh/836.jpg

I must say that the Puncher Pro is starting to shoot better everytime i use it. The custom parts are running in now and the gun starts to be fun to shoot......

Best regards, Roel :cool: